News Information

News Information

Current location:Index> News Information> Common Problem

What to pay attention to when using a horizontal machining center

2023-07-26
505

Four key points to note when using a horizontal machining center:

2卧式加工中心@2x.png


Environment for installing horizontal machining centers

Horizontal machining centers should be installed in places far away from the earthquake source, not exposed to direct sunlight, without thermal radiation, and without moisture. If there is a seismic source near the location where the horizontal machining center is installed, shock-absorbing grooves should be set up around the horizontal machining center.


Strict control of voltage and current

Horizontal machining centers are usually installed in the machining workshop, and the numerous mechanical equipment in the workshop inevitably leads to large fluctuations in the power grid. Therefore, the installation position of the horizontal machining center must strictly control the voltage and current of the power supply. The voltage and current of the power supply must be controlled within the allowable range of the horizontal machining center, and the voltage and current of the power supply must be kept stable, otherwise it will directly affect the normal operation of the horizontal machining center.


Temperature and humidity directly affect horizontal machining centers

Horizontal machining centers generally need to operate in an environment below 30 degrees Celsius to function properly. In general, the distribution box of horizontal machining centers is equipped with exhaust fans and air coolers to ensure that electronic components and central processing are working at a constant temperature.


Factory parameter settings for machine tools

When using a horizontal machining center, customers cannot arbitrarily change the factory parameter settings of the machine tool, as these factory parameter settings directly affect the dynamic characteristics of various components of the horizontal machining center. Only the gap compensation parameter values can be set according to the actual situation. If you want to change the factory settings parameters, you should contact the manufacturer and operate the factory parameter settings under the guidance of the manufacturer's technical personnel.


TAG

Previous article:

Recent browsing:

Copyright © 2021 Jiangsu Jiuxun Precision Machinery Co., Ltd. All rights reserved. Record number:苏ICP备2023025102号-1

technical support:

益众网络